ATM Networks :: Essays Papers

ATM NetworksTraditional local area meshs, much(prenominal) as Ethernet and Token Ring, use a connectionless or unreliable climb up when move information across the network. individually client is connected to the network by an adapter card, which has a driver, and above that driver is a communications communications protocol driver, such as TCP/IP. The protocol driver bundles information into frames of alter size, and gives each bundle an appropriate header. Then, when the wire is available, the data software packages are shipped polish off to be individually routed through the maze of hardware and software. Each packet in a serial publication of packets could conceivably take a diametrical route to reach the same destination. Traditional local area network technologies do non guarantee that data will arrive on time or in the proper order. Ethernet and Token Ring can detect errors, provided they provide no returns guarantees and are not responsible for recovery from mis sing or corrupted data packets.Because they are joined by a common medium, each station on the traditional LAN sees the packets of data put on the wire by each of the others, regardless of whether the packet is passed sequentially from one station to the next (as in a ring topology) or broadcast to all stations simultaneously (as with Ethernet). Each station has an adapter card, which processes the packet and examines the destination address. If the address applies to that machine, the adapter does a hardware interrupt and accepts the packet.Because a traditional LAN is connectionless, it cannot provide guarantees or similar features. For example, it cannot determine the status of the target machine. It cannot ensure that bandwidth will be available throughout the transmission. Unanticipated bottlenecks are common, which can hinder a traditional LANs ability to support time-sensitive applications such as video-on-demand or voice traffic. Traditional LANs can use upper-level protoco l drivers are to do such things as verify packet arrival (retransmitting, if necessary), partition big messages into smaller ones, use time stamps for synchronization, and so forth. However, these function add time to the transmission, and none of them provide end-to-end quality of service guarantees.ATM, on the other hand, is connection-oriented. An ATM end capitulum establishes a form (a virtual circuit, or VC) to the destination end point prior to sending any data out on the network. It then sends a series of same-size packets (called cells) along this path towards the destination. Note that while establishing the connection, the ATM end point also negotiates a quality of service (QoS) contract for the transmission.